Ewon TechForum
Providing technical solutions to technical requests


Commands via SMS
Nikolai Offline
Junior Member
#1
Hi,

EW4626B

Is there any way to switch the WAN connection from Ethernet to a 3-G modem by sending a special command via SMS?

For example like in BASIK script:

PRINT "GOING ONLINE"
 SETSYS COM,"LOAD"
 SETSYS COM,"WANCnx","1"
 SETSYS COM,"WANPermCnx","1"
 SETSYS COM,"SAVE"


Thanks,

Nikolai
Reply

simon Offline
eWON Support
#2
Hi Nikolai,

Yes, it is possible.
Actually, if your 3G connection is already setup (but not connected since the Eth WAN is connected), you can simply send a SMS "Talk2MConnect" : https://hmsnetworks.blob.core.windows.ne...256956d7_5

and the Ewon should switch to 3G automatically.

If you really want to script it, you should use the ONSMS event in your script to read incoming SMS : https://developer.ewon.biz/content/sms-reception-ewon

Simon
Reply

Nikolai Offline
Junior Member
#3
(14-02-2020, 06:03 PM)simon Wrote: Hi Nikolai,

Yes, it is possible.
Actually, if your 3G connection is already setup (but not connected since the Eth WAN is connected), you can simply send a SMS "Talk2MConnect" : https://hmsnetworks.blob.core.windows.ne...256956d7_5

and the Ewon should switch to 3G automatically.

If you really want to script it, you should use the ONSMS event in your script to read incoming SMS : https://developer.ewon.biz/content/sms-reception-ewon

Simon
Hi Simon, 

if Eth WAN connection was set on EWON the wake up sms doesn't work, perhaps it works on flexy but not on ew4626B.

Nikolai
Reply

simon Offline
eWON Support
#4
Nikolai,

What firmware do you use ? You should use the last one (Indeed I am not 100% sure it works with CD)

Simon
Reply

Nikolai Offline
Junior Member
#5
Thank you Simon, I'll test it in future.
Reply





Users browsing this thread:
1 Guest(s)



Theme © Ewon 2019 - Forum software by © MyBB - Cookie policy