Ewon Technical Forum

Hi to everyone,
an ewon suddenly stopped writing files to memory and it could not delete.

I restarted and I found this error on log page (the second restart was automatic):
20/11/2018 11:14:33    20174    pla<--Stato di interfaccia non ottenuto<                                            elog
20/11/2018 11:14:33    -22602    Avvio sistema, FWR: 13.0s0 (13.0), SN: 1822-0230-21 [EF0000]    elog
20/11/2018 11:00:38    36504    (Montaggio volume non riuscito)                                                         wd
20/11/2018 11:00:38    36504    Ragione riavvio: Errore critico; 36504 - 0x0                                        wd
20/11/2018 11:00:38    20174    pla<--Stato di interfaccia non ottenuto<                                            elog
20/11/2018 11:00:38    -22602    Avvio sistema, FWR: 13.0s0 (13.0), SN: 1822-0230-21 [EF0000]    elog

I formatted the usr partition, reloaded the content and now it seems to be ok: I can write and delete files.

I would like to know if you think this is a sporadic error or a warning of internal memory that could be damaged.


Thanks,
Francesco

Francesco,

Good question...

Do you use a SD card for that ? or the usr/ memory ?
Could it be that the usr/ memory was full ?

Simon

I use internal memory that is almost completely free (over 20000 kb free).

In this regard, I report a malfunction of the web interface:
in diagnostic -> state -> system counter -> memory information
the table content doesn't scroll so it's impossible to view the last lines
(I had to connect my laptop to a monitor to be able to view them)
I'm using firefox with italian language on eWon Flexy (13.0.s0)

Francesco

Francesco,

It is the first time I see this issue. If it happens again, I think it is better you report the issue to your local distributor.

Regarding the web interface issue, I reported that improvement to the R&D. Thx for the feedback.

Simon